News

Use and maintenance of vertical packaging machine!

Datetime: 2022-04-11    Visit: 126

Protect the environment, save raw materials, and reduce product costs. When packaging liquid products by hand, it is easy to cause splashing. When packaging powder products, flying dust is often generated, which not only pollutes the environment, but also wastes raw materials.

                                                                                                                             

· Basic cleaning includes
· (1) For the main body of the heat sealer, it should be cleaned frequently to ensure a clear seal texture.

· (2) After shutdown, the metering parts, such as sugar,  root powder, salt, etc., should be cleaned in time. It must be ensured that the blanking plate and turntable are cleaned every shift to prevent corrosion.

· (3) The scattered materials on the material tray should be cleaned up in time to keep the machine spray cleaner clean.

· (4) The photoelectric tracking head, that is, the electric eye, should also be cleaned regularly to ensure the small error of cursor tracking.

· (5) Regularly clean the dust in the electrical control box to prevent poor contact and other failures. The newly installed machine must be inspected, tightened, oiled and maintained within one week of use; after that, it must be inspected and maintained on a monthly basis;

                                                                                                                                                                                      

· Basic maintenance

· (1) Pay attention to the waterproof, moisture-proof, anti-corrosion and anti-rodent properties of electrical components. Electrical control cabinets and terminals should be kept clean to prevent electrical failures.

(2) Regularly check the screws of each part of the packaging machine to prevent loosening.

(3) Regularly add oil to the gear net of the packaging machine, the oil injection hole of the seat bearing and the movable parts. When adding lubricating oil, be careful not to drip lubricating oil on the drive belt to avoid slippage, loss of rotation or belt aging.

(4) When stopping the machine, the two heat-sealing rollers should be in the open position to prevent the packaging material from being damaged by scalding.