Maintenance points of powder packaging machine

Datetime: 2022-04-28    Visit: 521

1. Lubrication with oil

  It is necessary to regularly lubricate the meshing parts of the gears, the oil-filling holes of the bearing with seats and the moving parts for lubrication. Once per shift, the reducer is strictly prohibited from running without oil. When adding lubricating oil, be careful not to place the oil tank on the rotating belt to prevent slippage and loss or premature aging of the belt and damage. Another point to note is that the reducer must not be run when there is no oil, and after the first 300 hours of operation, clean the interior and replace it with new oil, and then change the oil every 2500 hours of operation. When adding lubricating oil, do not drip oil on the transmission belt, because this will cause the powder packaging machine to slip and lose or prematurely age and damage the belt.

2. Frequent cleaning

After the shutdown, the metering part should be cleaned in time, and the heat-sealing device body should be cleaned frequently, especially for some packaged materials with high sugar content in the granules, the turntable and the feeding door should be cleaned, and the heat-sealing device body should also be cleaned. The parts that are often cleaned to ensure the clear sealing lines of the finished packaged products should be cleaned up in time for the scattered materials to facilitate the cleaning of the parts, thereby better prolonging their service life. To prevent electrical failures such as short circuits or poor contact.

3. Maintenance of the machine

Maintenance of the powder packaging machine is the key to prolonging the life of the packaging machine, so it is necessary to check the screws of each part of the powder packaging machine frequently, and there must be no looseness. Otherwise, it will affect the normal remote rotation of the whole machine. The electrical parts should pay attention to waterproof, moisture-proof, anti-corrosion, and rat-proof to ensure that the electric control box and the terminals are clean to prevent electrical failures. Burn the packaging material.

In the process of our daily use of powder packaging machine, daily maintenance is very important. Good maintenance can greatly increase the life of the machine and improve work efficiency. This article lists some of the more important maintenance points.