Daily maintenance skills of multifunctional powder packaging machine:

 

1. When the machine needs to work, it must be ventilated and then powered on. When it is stopped, the power is cut off first and then the gas is cut off.

 

2. There must be a reliable grounding device when the multifunctional powder packaging machine is to be installed.

 

3. The operating environment of the multifunctional powder packaging machine should be at a temperature of -10℃-50℃, and the relative temperature should not be greater than 85%.

 

4. After two or three months of continuous work, open the back cover and add lubricating oil to the sliding parts such as the head bump.

 

5. Always check the joints such as decompression and filtration to see if there is water in the cup.

 

6. The silicone strips and heating strips should be kept clean, and there should be no foreign matter, so as not to affect the sealing quality.

 

7. When the high temperature tape is damaged, it should be replaced in time.

 

8. The multi-functional powder packaging machine should not be placed obliquely and bumped during the handling process, and should not be tipped down for handling.

 

9. The working pressure of the multifunctional powder packaging machine should not be adjusted too high.