Touch, the screen shall show the following pictures: 

1. “Triangle bag color matching” is only used for triangle bag machine. Triangle bag machine has two groups of seal cutters: front/back and left/right cutters. During normal working, these two groups of cutters shall work alternatively. Sometimes, it’s necessary to fix a group of cutters to be corresponding to the pattern on package film, in this case, you can realize it if press this button.

2．“Temperature/Stir switch”, it is a switch for Y3 output. It controls temperature for some machines and controls stirring for the other machines.

3．“Inflate angle” refers to when it begins to inflate. It is adjustable when proximity switch contacts at 0 degree or 300 degree. Normally, it is 150~190 degree.

4. “Inflate time” refers to the duration to inflate constantly for each bag, that is the period for an electric-magnetic valve to inflate. It usually takes 0.2 seconds. ON/OFF switch on the right has the function of open and close this function.

5. “Front vibrat angle” refers to when it begins to vibrate. It is adjustable when proximity switch contacts at 0 degree or 300 degree. Normally, it is 180~220 degree.

6. “Front vibrating time” refers to the duration for each bag to vibrate constantly. ON/OFF switch on the right has the function of open and close this function.

7. “Front vibrat power” is used to adjust front vibrating force, with a scope from 0 to 9. Vibrating force shall be bigger if this value is bigger.

8. “Back vibrat power” is used to adjust back vibrating force, with a scope from 0 to 9. Vibrating force shall be bigger if this value is bigger. The duration of back vibration is decided by back vibrating photo-electricity. It shall begin to vibrate when the photoelectric eye finds there is no material any more in filling hopper and it shall stop vibrating when the hopper is full. 3 minutes later, if full material signal is not released, the screen shall show: “Back vibration is overtime, please check back vibration photo-electricity.” And the machine shall stop vibrating automatically after 5 minutes so as to prevent the vibrator from permanent damaging. ON/OFF switch on the right has the function of open and close this function.