1．The instructions of menu（picture1）

(1)“Running”button,is to choose running, the screen will go the operating screen,this screen will help you to operate the machine;

(2)“Parameter screen”button,is to adjust the parameter of parts,this screen need password to open;

(3)“Output test”button,is to test the parts round normal or not;

(4)“Input monitoring”button,is to monitor the state of machine round.

                                    picture1 the menu of screen

2.  Running operation（picture2）

At the top of screen,press“Running”button,then enter into it,the function as following:

(1)“Package quantity”button is to calculate the package quantity,if it no filling no count;

(2)“Package speed”button is to show every minutes the package quantity,to measure the packaging production;

(3)“Host frequency”button is to set main motor’s running frequency,you can set in the screen;

(4)“Counter reset ”button is to remove the cumulative number of packages;

(5)“The width of bag”button is according to the width of bag to adjust the size of clip;

(6)“Running”button is to control the machine’s normal running;

(7)“Jog” button is to control the host slowly running; press“Jog”the machine will step by step to run,after release the button the machine will be stop;

(8)“Stop”button is to stop the machine running;

(9)The other rotate buttons, is to the corresponding function run or stop.

                                                                    Picture2