Every time you change a new film roll, please set the unwinding parameters correctly according to the actual situation, and click the roll diameter calculation to reset it to reset the roll diameter calculation.
Outer diameter of film roll :Set the outer diameter of the entire film roll，including the paper tube.
Paper tube diameter:The outer diameterof the paper tube in the center of the film roll.
Film thickness:The thickness of the film is silk, which is 0.01um.
Maximum acceleration:The acceleration of the inverter when the film roll is thickest.
Minimum acceleration:The acceleration of theinverter when the film roll is in the thinnest state.
Current acceleration:The acceleration of the inverter currently set.
Total film length:After entering the film roll parameters, the length of the entire roll film is automatically calculated.
Remaining film length:Each time the film is pulled during the operation of the equipment, the total mold length will be reduced by the corresponding length.
Remaining roll diameter：The thickness of the roll remaining during operation.
Roll diameter calculation reset:After each roll change, determine the parameters of the roll and click the roll diameter calculation to clear it. The previously accumulated roll diameter length will be cleared and the calculation will restart.
If the unwinding rotates too fast and the roll supply is too loose when the roll is thick, please increase the maximum acceleration. If the unwinding is too slow and the gravity rod is pulled to the top, please reduce the maximum acceleration.
If the unwinding rotates too fast when the roll is thin and the roll supply is too loose, please increase the minimum acceleration. If the unwinding is too slow and the gravity rod is pulled to the top, please reduce the minimum acceleration.
E-mail: 
Tel: 0086-577-65556444
Fax: 0086-577-65557444
Contact Cindy Lv