1.In thick material mode, the position light on and leak check in thick material mode, the position light on and leak check.

There is a problem with the photoelectric switch, check method: The light on the main board will be on after the photoelectric switch is covered, and the light will go out if it is not covered.

Please adjust the photoelectric switch, and the relevant indicator light on the main board just goes out when there is nothing.

2.Press the Start key, and the motor is unresponsive.

If the forward indicator on the board is on, it means that there is a problem with the solid state relay. If it doesn't light, it means there is a problem with the keyboard.

3.Incorrect pass count

The sensitivity of the light control switch is low, please reduce the sensitivity of the light control switch.

4.Belt bias

Adjust the left and right bolts with the hexagon socket tool in the accessories.

5.Other problems?

   Please contact our company