News

Four common faults of packaging machine equipment

Datetime: 2022-09-05    Visit: 87



Fault 2: When the packaging machine equipment is working, the heating ring does not heat after the heating ring switch is turned on

  Solution:

1. Check whether the measuring heating ring is open circuit or replace the heating ring

2. Check whether the control switch of the measuring heating ring is faulty or replace the control switch

 

Fault 3: There is an electric shock leakage phenomenon in the operation of the packaging machine equipment

  Solution:

1. Check whether the heating ring on the measuring machine is leaking or replace the heating ring

2. Check whether the heating tube of the measuring head is leaking or replace the leaking heating tube

3. Check and measure the running motor for leakage or replacement

 

Fault 4: The sealing or edge sealing shaft of the packaging machine equipment does not heat up during operation

  Solution:

1. Check whether the temperature setting is correct

2. Measure whether the heating tube of the machine head is open circuit or replace the faulty heating tube

3. Check whether the thyristor controlling the heating tube is open circuit or replace the thyristor