Model

型号

HT-1000

Width of roll material

材料宽度

600mm

Max. Diameter of roll material

最大放卷直径

1000mm

Max. Diameter of rewinding roll

最大收卷直径

600mm

Min. Width of slitting

分切宽度

13.5mm,14mm,15mm

Slitting Speed

分切速度

0-200m/min

Total Power

总功率

6.5kw

Overall dimension ( L x W x H mm)

机器尺寸

2011x1910x1500

Weight

重量

2000kg

Mahchine Main Parts

The machine withUnwinder ,WebGuide ,SlittingSystem ,RewindingUnit ,Transmission System ,ElectricControlPart , etc.

1. Unwinder

A. The machine with Manual horizontal alignment , Eliminates tension and wrinkles caused by the thick ends or uneven cores of the raw materials

B. The high linear magnetic powder brake is used as the unwinding tension actuator. The output torque is balanced, and the tension fluctuation can be reduced to the lowest state. The Siemens PLC automatically detects and calculates the size of the material through online and automatically controls the unwinding tension output.

C. Loading Materila，pneumatic lift loading

D. Air Shaft Unwinder，100NM magnetic powder brake tension controled by PLC

E, Web Guide Control Ssyem

2，Slitting System

The machine uses a round knife to cut, the incision is neat, and the service life is long. The upper and lower knife axes of the slitting are widened, and the speeds of the upper and lower knife shafts are matched by the gears. Rotate the hand wheel to implement the knife, and continue turning to achieve automatic knife.

A, Slitting shaft , 1 set Top knife shaft and 1 set bottom knife shaft

B, Locking device: With a rapid tool setting device, it can lock the upper knife shaft to avoid cutting quality problems caused by the upper and lower knife disengagement or movement.

C, High-pressure fan through the blowing pipe diversion, the waste edge come out